PremiCote 1650

PremiCote 1650 is a plasticizer free, 100% acrylic, single component, bleed blocking, water based, premium quality elastomeric coating for spray, brush, or roller application over most roofing surfaces including metal, single ply and fabric surfaced asphalt emulsions.

Recommended Uses:

This product is intended for use as a highly reflective protective coating for most roofing substrates. May be used over metal, granulated cap-sheet and fabric-surfaced asphalt emulsion. Contact Premium Spray Products for specific application information.

Product Limitations:

This acrylic coating is water based and must be stored and used to prevent from freezing at 32°F (0°C). Do not apply when inclement weather is imminent. Curing is necessary prior to precipitation to avoid washing off the coating or affecting adhesion or physical properties. Do not apply if temperature will drop below 50°F (10°C) within 1-2 hours. The acrylic coatings stop curing below 50°F. Do not apply when the relative humidity is in excess of 85%. Avoid applying late in the day when conditions for dew and condensation are imminent. Material is not intended for ponded water applications. Applications where there is a risk of vapor drive, such as cold storage and refrigerated tank applications should only be made in conjunction with a suitable vapor barrier. This material is not intended for use as a thermal barrier.

Ponding Water: 

Warranties do not cover damage due to ponding water. The National Roofing Contractors Association considers ponding water on any roof unacceptable. (See the NRCA Roofing and Waterproofing Manual). For additional assistance please contact the Premium Spray Products Technical Services dept. of Accella Polyurethane Systems, LLC. at (770) 528-9556.

General Properties:  

PremiCote 1650 has been formulated for maximum adhesion to most roof surfaces and to provide maximum bleed through resistance over asphaltic surfaces. Adhesion to fabric covered emulsions and granule surfaces is tenacious. Material is developed for maximum water resistance using the highest quality ingredients and attention to detail during manufacturing. This coating has the unique ability to provide a membrane that is not only watertight but also breathable allowing the escape of any trapped moisture vapor from the substrate.

STANDARD COLORS / PACKAGING
PREMICOTE 1650 BC - BASE COAT
Base coat formulation is available. Provides excellent adhesion and recoatability
AVAILABLE COLORS
Gray
PREMICOTE 1650 TC - TOP COAT AVAILABLE COLORS
Light Gray
PRODUCT PACKAGING AVAILABLE IN
5 Gallon Pails
55 Gallon Drums
Typical Physical Properties

PROPERTY PREMICOTE 1650 TEST
TENSILE STRENGTH 300 psi ± 25 ASTM D 2370
ELONGATION 304% ± 25 ASTM D 370
PERMS 4 ASTM D 1653
SOLIDS (BY VOLUME) 55% ± 3 ASTM D 1644
SOLIDS (BY WEIGHT) 69% ± 3 ASTM D 370
DENSITY 11.65 lbs / Gallon ASTM D 370
VOC < 50 gal/liter Method 24
FLASH POINT > 212°F ASTM D 1310
TEMPERATURE LIMIT 0°F to 185°F
LOW TEMP. FLEXIBILITY Passes 180°Flex over ½ Mandrel @ -30°F (-1°C) ASTM D 522
CURE TIME 24 hours depending upon temp. & humidity
DRY TIME 5 Hrs. at 75°F (50% RH)
UL LISTING This product has achieved a UL Class A rating over a combustible deck when tested in accordance with UL 790.
ASTM D 6083 Passes requirements of ASTM D 6083 Standar d for Acrylic Coatings