Archives: Archives

PremiCote P79

PremiCote P79 may be used as a prime coat over primarily metal surfaces but can be also be applied to a wide range of substrates which include, but are not limited to, wood, metal, concrete, masonry, various single ply membranes, spray polyurethane foam and most commonly used roof coatings dark red color speeds up drying and increases roof surface temperature before application of roof coatings.

PremiCote P75

PremiCote P75 primer has been formulated with specialty polymers and wetting agents to maximize adhesion to a variety of substrates including aged asphalt, wood SPF and concrete (cured for a minimum of 30 days).

PremiCote P64

PremiCote P64 primer has been formulated with specialty polymers to maximize adhesion to PVC membranes and to resist migration of plasticizers from the PVC membrane.

PremiCote 1650

PremiCote 1650 is intended for use as a highly reflective protective coating for metal and low slope roof restoration. May be used over metal, granulated cap-sheet and fabric surfaced asphalt emulsion.

PremiCote 1600

PremiCote 1600 is intended to be used as a universal tank, roofing and wall coating. It has excellent adhesion to many substrates including polyurethane foam, concrete, masonry, primed metal and primed wood.

PremiCote 1500 TC

PremiCote 1500 TC (TOP Coat) is formulated to be one of the highest performing elastomeric coatings in the market place. The increased levels of high performance polymers provide exceptional tensile and elongation properties.

PremiCote 1500 BC

PremiCote 1500 BC (BASE Coat) is formulated to be one of the highest performing elastomeric coatings in the market place. The increased levels of high performance polymers provide exceptional tensile and elongation properties.

PremiCote 1400 TC

PremiCote 1400 TC (TOP Coat) is a plasticizer free 100% acrylic, single component, waterbased, premium quality elastomeric coating for spray, brush, or roller application.

PremiCote 1400 BC

PremiCote 1400 BC (BASE Coat) is a plasticizer free 100% acrylic, single component, waterbased, premium quality elastomeric coating for spray, brush, or roller application. This is a BASECOAT formulation designed for better adhesion to the initial substrate.

Foamsulate 220

Foamsulate 220 has a 7.0 per inch R-value rating while providing structural enhancement due to its semi-rigid nature when cured. Foamsulate 220 is a 2.0 pcf density closed cell insulating material.

Page 3 of 41234